EVAPLUS 42V 1.5A Charger PowerFast 3-Prong Inline Connector for 36V Pocket Mod, Sports Mod Lithium Battery, Battery Charger for Millet Electric Scooter


$18.99 - $15.90
Aug 28,2020 06:41:08 UTC


Product Description

The most important information: the charger doesn’t fit for Razor E100 E200 E300 E125 E150 E500 E175 PR200, E225S E325S MX350

Please note that:

Smart Two Wheels Self Balancing Scooter Li-on Battery Power Adapter Charger, it just charge the 36V Li-on battery.

1 Faster and safer charging with our adapter

2 Intelligent high-speed charging for most 36V versions scooters and Millet Electric Scooter (Please check for the details and make sure this is the right one you need.)

If it is not charging your scooter, it’s likely one of the following reasons:

1. The charger doesn’t fit your scooter, please kindly tell us your device’s brand and model. We would like to check the compatibility for you.

2. Your battery is broken. As lithium(Li-on) battery has a limited service life. If your battery has been used for over 12 months or unused for 2-3 months, your battery might be broken.

In this situation, the charger LED will show green – no charging as battery is dead. You can test our charger with another device, or check your battery with another charger.

3. Our charger is defective, in this case, please inform us, we will make a full refund or send a replacement.

0101

Instructions for use

02

02

03

03

04

04

05

05

STEP ONE

Plug the adapter to the 100V-240V power supply, the light turn to GREEN—it means the charger can get the power.

STEP TWO

Plug in the scooter by the right way!

NOTE: PLEASE COMFIRE THE 3PIN PORT IN THE INSERT CORRECTLY. IF INSERT IN CORRECTLY, THE LIGHT WOULD NOT TURN TO RED, AND CAN’T CHARGE.

STEP THREE

Connect your scooter with the adapter, the GREEN light will turn to RED— it means the charger is chaging for your scooter.

STEP FOUR

After a few hours, the RED light turn to GREEN—it means its fully charged. NOTE: please remove the charger when it’s fully cahrged.

a. Please confirm the 3pin port in the insert correctly.

b. Maximum operation temperature of the product is 40 degrees Celsius.

c. Mains supply tolerance: 100-240Vac (-10%/+10%) of input voltage considered.

d. Please do not overcharge. When the ligth is green, please remove the charge.

The shell is made by High-quality plastic, smooth appearance, have no impurities. Short Circuit Protection/ Over current Protection/ Over Voltage Protection,

LED Display Green: Charged OK, Red: Charging 100% full load aging test, Internal EMI filter, ripple minimum.

No fan, no noise. The charger have fan with simply built-in, can absorb dust and pile up easily then get burn. Our fanless design have a strong built-in ,with radiating fin surrounding the broad, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable.

Superior Quality We use only premium IC.

Product Information: Power Charger Model: XHK-800-4215

Color: Black Input: 100-240VAC,50/60Hz,2.5A(Max) Output: DC42V 1.5A

Connecter size: 3 prong Inline Connecter diameter: about 8mm UL Scooter Fast Charging Adapter

0606

UL

Certified Safe – UL, Safer and more secure.

EVAPLUS 42V 1.5A Power Charger, Please note that – A. Maximum operation temperature of the product is 40° C : B. trained service personal only; C. Mains supply tolerance: 100-240Vac (-10%/+10%) of input voltage considered. D. Please do not overcharge. When the ligth is green, please remove the charge.
World Wide Input Voltage – Input AC 100 – 240V 50/60Hz, output 42V 1.5A (1500mA)
The most important information: the charger doesn’t fit for Razor E100 E200 E300 E125 E150 E500 E175 PR200, E225S E325S MX350. Connector – 3-prong Inline female 8 mm(0.3 inch) in diameter
Indication Light – Red light on when charging, green light on when fully charged, charge time about 4-6 hours
DIFFERENT PRICE, DIFFERENT QUALITY-No questions ask return policy,Gurantee your satisfaction