Flipsky Dual FSESC 4.20 Plus (Based on VESC) with Anti-Spark Switch Integrated Anodized Aluminum Heatsink Skateboard Electric Speed Controller E-Bike Longboards Skateboarding DIY ESC

Flipsky Dual FSESC 4.20 Plus (Based on VESC) with Anti-Spark Switch Integrated Anodized Aluminum Heatsink Skateboard Electric Speed Controller E-Bike Longboards Skateboarding DIY ESC


$169.00
Aug 11,2020 00:06:23 UTC



You can connect your ESC to your computer and modify them using the VESC BLDC Tool. Our ESC ships to you tested multiple times
during the production cycle and are ready to use. The ESC will provide optimum performance when configured for your particular motor and battery voltage.

The Flipsky ESC allows you to use sensorless motors to achieve smooth start-up from a stop versus traditional RC ESC’s which may have trouble starting from a complete stop. It also provides strong. reliable and progressive electric braking.

Advanced Features:
Hardware:V4.20
ERPM:60000
Firmware:3.40 (Keep upgrading if FW is updated)
Current:50A continuous/single, 100A continuous/dual ,burst 150A/single, burst 300A/dual
Voltage: 8V-60V (Cells: 3-13S LiPo)
BEC: 5V@1.5A
BEC type: Internal driver support
Modes: DC, BLDC, FOC (sinusoidal)
Timing: Software calibration
Cutoff Voltage: Programmable
Frequency: PWM input
Programming card: No
Reverse: Yes
Regenerative braking power: Yes
The shipping package contains:
1*Dual FSESC4.20 Plus + Heatsink
2*VESC Sensor Wires
1*Micro USB
1*Manual
1*16mm LED button

If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours

NOTE:Integrated anti-spark switch function in the PCBA (Reminds : the LED button is defaultly inserted in the switch in shipping status. DO NOT power on switch without the LED button connected).

Integrated anti-spark switch function in the PCBA (Reminds : the LED button is defaultly inserted in the switch in shipping status. DO NOT power on switch without the LED button connected).
The Flipsky ESC is based upon the VESC open source project, and compatible with VESC software. The Flipsky ESC is a highly modifiable electronic speed controller designed with DIY electric skateboards conversions in mind.
FOC(Field Oriented Control) makes the motor more smooth and less noise and even saving much power.
Adjustable protection against: High input voltage, High motor current , High input current , High regenerative braking current (separate limits for the motor and the input), Rapid duty cycle changes (ramping)
Top Service: If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours